A repeatable process, not a one-off. Lost-foam vacuum casting uses an expanding polystyrene pattern that vaporizes when molten metal is poured, eliminating cores and parting lines. The result is complex geometry with high dimensional consistency and excellent internal quality.
What happens after I send a drawing?
- Drawing review (1–2 days) — our engineers check structure, wall thickness, draft and machining allowance.
- Process & gating design — gating and riser layout, plus casting simulation when required.
- Pattern making (3–7 days) — CNC engraving on our 6 m × 3 m machine; patterns are checked against the drawing.
- Coating & drying — automatic wet/dry drying with controlled temperature and humidity; racks leveled by infrared level.
- Boxing & sand filling — 4 stations; two-stage reclaimed sand with controlled dust and permeability; vacuum compaction.
- Melting & pouring — two 2-tonne induction furnaces; two composition samples per heat; up to 5 t single-piece pour.
- Shakeout & cleaning — shot blasting on 2.5 m × 2 m and 3 m × 2.5 m machines, grinding and dressing.
- Heat treatment — annealing in automatic temperature-controlled furnaces up to 4 m × 3 m.
- Final inspection & shipment — composition, metallography and dimensional checks; batch records archived 2 years.
Typical lead time
After order confirmation: 3–7 days for pattern making, then 20 days for the casting process. Repeat orders are faster because the pattern is retained.
“`mermaid
gantt
title Typical lead time for a new machine tool casting
dateFormat YYYY-MM-DD
section Pattern
Drawing review & design :a1, 2026-01-01, 2d
CNC pattern making :a2, after a1, 5d
section Casting
Coating & drying :b1, after a2, 2d
Boxing & pouring :b2, after b1, 3d
Shakeout & cleaning :b3, after b2, 5d
Heat treatment :b4, after b3, 4d
Inspection & shipment :b5, after b4, 3d
“`
