Home / Insights / How to Inspect Machine Tool Castings: From Spectrometer to Metallography

How to Inspect Machine Tool Castings: From Spectrometer to Metallography

How to inspect machine tool castings: verify chemical composition before and after pouring, check metallographic structure of every heat, confirm dimensions against the drawing, and keep batch records for traceability. A supplier that does all four can protect your machining investment.

Why is inspection critical for machine tool castings?

Machine tool bases and columns are machined heavily before assembly. A casting with incorrect chemistry, hard spots or internal porosity can be scrapped after days of machining — far more expensive than the casting itself. Inspection at the foundry is the cheapest place to catch problems.

What should you ask your supplier to check?

  1. Charge composition — carbon–silicon analysis before melting ensures the melt starts within specification.
  2. Two spectrometer samples per heat — one before tapping and one before pouring, to catch drift.
  3. Metallographic analysis — confirms graphite morphology and matrix structure after solidification.
  4. Batch traceability — samples stored by batch number for at least two years.
  5. Dimensional checks — compare critical features to the drawing before shipment.
Defect risk Detection method When
Wrong chemistry Carbon–silicon analyzer + OES Before and during pouring
Unstable matrix Metallographic analyzer After solidification
Shrinkage / cold shuts Casting simulation + visual/dimensional inspection Before tooling and after shakeout
Dimensional drift Drawing comparison Before shipment

“`mermaid
flowchart LR
A[“Charge”] –> B[“C-Si analysis”]
B –> C[“Melt”]
C –> D[“OES sample 1”]
D –> E[“OES sample 2”]
E –> F[“Pour”]
F –> G[“Metallography”]
G –> H[“Batch ledger”]
H –> I[“Shipment”]
“`

Frequently asked questions

An optical emission spectrometer measures the elemental composition of molten iron in minutes. We take two samples per heat — before tapping and before pouring — so we can correct the chemistry before metal enters the mold.

If a customer reports an issue long after delivery, the retained sample and batch ledger let us reproduce the exact heat conditions and identify the root cause instead of guessing.

Yes. Composition and metallography records are generated for every heat and can be shared for the batches in your shipment. Ask for the batch numbers when you send your inquiry.

Discuss Your Project ↗

Have a drawing? Let's talk castings.

Request a Quote ↗