Lost-foam vacuum casting vs. conventional sand casting for machine tool components: lost-foam removes cores and parting lines, giving better dimensional consistency and more design freedom for beds, columns and bases. Sand casting remains competitive for very large, simple shapes and low volumes. Here is how to decide.
What is the difference between the two processes?
In conventional sand casting, a reusable pattern is withdrawn from a sand mold and separate cores create internal cavities. In lost-foam vacuum casting, an expanded-polystyrene pattern stays in the sand, is coated, and vaporizes when metal is poured under vacuum. There is no pattern withdrawal, no core assembly and no parting line.
Comparison table
| Factor | Lost-foam vacuum casting | Conventional sand casting |
|---|---|---|
| Pattern | Expanded foam, consumed each pour | Reusable wood/metal pattern |
| Cores | Not required for most cavities | Separate cores needed |
| Parting lines / draft | Minimal or none | Required |
| Dimensional consistency | High — CNC-formed foam patterns | Good, affected by core shift |
| Complex geometry | Excellent for ribbed machine tool structures | Good, limited by core access |
| Best volume | Samples to series production | Low to medium volumes |
| Our sizes | Tables/saddles ≤ 2 m, bases/columns ≤ 1.5 m, headstocks unlimited | Depends on flask size |
When should a machine tool builder choose lost-foam?
- The part has complex ribs, internal cavities or undercuts that would need many cores.
- You want tight dimensional repeatability across a production run.
- You need prototypes and series parts from the same process route.
- Surface finish and machining allowance need to be predictable.
When is sand casting still the better choice?
For very large, simple shapes — such as massive machine platen or simple box sections — conventional sand casting can avoid the per-piece cost of a foam pattern. For one-off parts with generous tolerances, a simple sand mold may also be cheaper.
“`mermaid
flowchart TB
A[“New machine tool part”] –> B{“Complex ribs / cavities?”}
B –>|Yes| C{“Need repeatable dimensions?”}
B –>|No| D[“Sand casting usually sufficient”]
C –>|Yes| E[“Lost-foam vacuum casting”]
C –>|No| F[“Compare tooling cost per piece”]
“`
Frequently asked questions
Yes. Lost-foam vacuum casting is widely used for grey iron and ductile iron machine tool structures. Our two 2-tonne medium-frequency furnaces can pour up to 5 tonnes in a single piece, which covers most bed and base sizes.
Yes for functional surfaces such as guide ways and mounting faces. The process reduces excess stock and machining allowance, but precision surfaces still require machining. We plan to add in-house machining from 2027.
With CNC pattern equipment, a new machine tool casting pattern typically takes 3–7 days after order confirmation. The foam pattern is consumed in the pour, so series production needs a batch of patterns.
