Home / Quality Control

Quality Control

Every heat is sampled. Every sample is archived. Our testing chain covers composition control before melting, during melting and before pouring — plus metallographic verification after solidification. Records are kept by batch number for two years so any casting can be traced back to its heat.

How do we control casting quality?

1. Carbon–silicon analysis — before the furnace

Rapid furnace-front analysis confirms that charge composition meets process requirements, improving both melt quality and batching efficiency.

2. Optical emission spectrometer — two samples per heat

One sample is taken before tapping to confirm each element is within specification; a second is taken before pouring to verify the final composition.

3. Metallographic analysis — after solidification

Every heat is sampled, with element composition and metallography records filed against the batch number. Samples are stored for two years.

Control point Method Frequency Record
Charge / pre-furnace Carbon–silicon analyzer Every heat Composition log
Before tapping & before pouring Optical emission spectrometer 2 samples per heat Element analysis
After solidification Metallographic analyzer Every heat Metallography + element ledger
Sample retention Batch-numbered storage 2 years Traceable archive

Dimensional and appearance control

“`mermaid
flowchart TB
A[“Charge material”] –> B[“Carbon-silicon check”]
B –> C[“Melting in 2t induction furnace”]
C –> D[“Sample 1: before tapping”]
D –> E[“Sample 2: before pouring”]
E –> F[“Pouring”]
F –> G[“Metallographic analysis”]
G –> H[“Batch ledger + 2-year sample archive”]
“`

Ask for Our Inspection Process ↗

Have a drawing? Let's talk castings.

Request a Quote ↗